<strike id="z19jr"><i id="z19jr"><cite id="z19jr"></cite></i></strike>
<span id="z19jr"></span>
<strike id="z19jr"></strike>
<strike id="z19jr"><i id="z19jr"></i></strike>

快速導航Product Center

DOWELL INDUSTRIAL CO.,LTD

手機:15958848208

郵箱:sales@dowellparts.com,814697881@qq.com

地址:No.126 Chaoyang,Jiangshan Town,Yinzhou District,Ningbo.China

聯系人:Mr.shi

Industry trends

    Problems needing attention before starting blowing molding

    文章出處:未知 責任編輯:admin 人氣:發表時間:2020-06-24 12:08【

    1. Close the main power switch of the machine tool, check whether the equipment leaks electricity, preheat the barrel and mold according to the set process temperature requirements, and keep the temperature for more than 20 minutes when the barrel temperature reaches the process temperature, so as to ensure the temperature of all parts of the barrel is uniform.
     
    2. Open the cooling water valve of the oil cooler, cool the oil return and water delivery pipe, start the oil pump by inching. If no abnormality is found, the oil pump can be officially started. Only when the screen shows "motor on", can the operation be started. Pay attention to the reverse of the motor and check whether the function of the safety valve is normal.
     
    3. Manually start the screw rotation to check whether the screw rotation sound is abnormal or stuck.
     
    4. The operator must use the safety door. If the travel switch of the safety door fails, it is not allowed to start the machine and operate without the safety door (cover).

    相關資訊